Comments on: Do you experience any issues with iPhone Firmware 2.2?

By: drummie

drummie — Wed, 08 Apr 2009 12:21:52 +0000

i just need to know how to upload recorded vidioes taken with the cycorder,to my toshiba laptop..so far everything is going real good…i upgraded mine to 2.2.1 firmware..

By: Rinnie

Rinnie — Mon, 16 Mar 2009 00:47:53 +0000

I did jailbreak my iphone used QuickPwn ver 2.2 a week ago and went smoothly …but now my iphone stuck (hang on reboot). I tried to reset it (hold the power button + home button at the same time)…but nothing change. Pls…if someone can help me…

By: Stef

Stef — Sun, 01 Feb 2009 20:28:07 +0000

Hello I have a slight problem with unlocking an iphone 2g 16gb on software version 2.2.1. I updated to 2.2.1 with itunes and followed all instructions with quickpwn 2.5. The problem I have is: Iphone shows T-Mobile sim, which is correct, but I cannot make or receive phone calls or send and receive sms. It says call forwarding active…and a voice mail. When I call the voice mail service it doesn’t work. When I add the simcard into another phone, there is no voice mail. When I go into the phone settings it says call forwarding active – forwarding to “error” and I cannot move the slider. I can’t do anything within the phone settings. Everything is greyed out. I added an orange sim into the iphone to see if it recognises it, but it shows “no service”…any other sim card doesn’t work either. I tried unlocking with a simcard in the phone and also no simcard in the phone. Both times it didn’t work. I unlocked many iphones and this is the first one that doesn’t work. This phone has been previously activated with O2 on a contract, but the owner then gave me the phone as a present. I really don’t know what else to do. Please let me know…and many thanks.
I also downgraded it to software version 2.2, and tried to unlock it, but no luck.
Cheers Stef

By: Bong Yak Wui

Bong Yak Wui — Wed, 14 Jan 2009 09:00:16 +0000

I’ve upgraded to 2.2 couple days ago and I ran into serious problem…First my Wifi is no longer working (my wifi activation feature is now Grey out…meaning i cannot turn on the wifi in this case) and 2nd problem i encountered is the battery life is now only lasted for not more than 6 hours. This is weird because my iPhone was in perfect condition because I decided to upgrade its to 2.2. It seem to me that it’s time to buy a new one because there is no U-turn, it can’t be downgraded to the previous 1.1.4 version to see if the wifi and battery is working the way it should. What a bad step forward….bong

By: ebony

ebony — Wed, 07 Jan 2009 09:19:56 +0000

i upgraded to 2.2 then i jailbroke it the first time when i was in the flash part of the jailbreak an error message on my laptop came up and said quickpwn may have not installed properly but there was nothing i could do by that pouint so i went into cydia updated everything then downloaded boss prefs turned ewverything off but wifi opend cydia took out att sim put tmobile sim add yellosnow source and installed then went to general then and reset network settings then waited and nothing happened for 30mins so i rebooted and still nothing then i restored my phone again so i could rejailbreak and that when it began to go in dfu mode i restored it 6 times because it wouldnt work i tried jailbreaking it 3 times with my att sime and 3 with tmobile i even reinstallled quickpwn and still the same thing
im so lost i dont know why quickpwn isnt working
im using iphone 3g 2.2 fw bb 2.28
email me if you find a soultion daniels10141987@yahoo.com

By: Jill

Jill — Mon, 05 Jan 2009 06:12:23 +0000

i used pwnage to jailbreak my 3G after updating it to 2.2 and everything went well. my friend who has a first generation asked me to do the same for his. i figured his would need the update so i updated it to 2.2 it said that it needed to be reactivated. so we activated it through pwnage. the phone is now on and working but the calls arent going through and it says he has no service. safari works, and so does the gps. he called AT&T and they said it wasnt his plan that it was his phone but gave him no further information. what could cause this or how can i fix it?

By: Nishant

Nishant — Tue, 23 Dec 2008 09:52:04 +0000

Hi,

I recently bought a 3G iPhone and used QuickPwn v2.2 for Windows to jailbreak. I got success in jailbreaking it, but now I am stuck as it gives me “NO Service” Status and am unable to get any carrier service. Any patches or any fix to this problem. Please help.

Regards,
Nishant

By: bonghitrebel

bonghitrebel — Thu, 18 Dec 2008 13:56:21 +0000

hi guys
ok, i just bought a new iphone 3g along with a turbo sim. I put my sim card with teh turbo sim and everything seemed to work fine up until i updated it to 2,2. Ofcourse, i was stupid and pressed restore thinking that it would fix the problem. But now the phone wont do anything except emergency calls, and on itunes it says “the sim card inserted in this iphone does not appear to be supported” and i cant open anything. PLEASE does anyone have a solution?? im reading tons of forums but no one talks about a solution… everyone only says dont update, and dont restore.. well i did!! so what now??

By: Al Leng

Al Leng — Tue, 09 Dec 2008 03:12:51 +0000

I get a crash when I’m getting photos off the iphone. After the pics transfer, the iphone spontaneously reboots.

By: Jones Ong

Jones Ong — Mon, 08 Dec 2008 13:19:03 +0000

Cydia doesn’t work after upgrading from 1.1.4 to 2.2
______

SOLVED!

when using Pwnage, do not download any Cydia installer or apps. Do so only at the next step where Cydia and Installer are checked automatically!

Tada!

*pwned multiple times by saying NO to whether I have ‘pwned my phone before’… ignore all error messages… it works for me somehow…

By: Jones Ong

Jones Ong — Mon, 08 Dec 2008 12:40:33 +0000

Hi there,

Cydia doesn’t work after upgrading from 1.1.4 to 2.2…

any fix?

By: joean

joean — Fri, 05 Dec 2008 21:58:23 +0000

hi,
upgraded and jailbreaked from 1.1.4 to 2.2… great! thanks.
before I installed wifi, data roaming was switched off ( edge off) , I received incoming and outgoing data….( did a reset of network data and againg…received ….. how come??
worried about costs..
joean